Loading... Please wait...

Add to Wish List

Click the button below to add the Laser-cut box for 6 gang Cobalt S lever frame to your wish list.

Laser-cut box for 6 gang Cobalt S lever frame

  • laser cut box for 6 gang S lever frame
(12 gang frame shown)
  • open box frame to mount levers and PCBs
  • levers screwed to internal shelf with spacers that come with the levers
(12 lever box shown)
  • open back to plug in harnesses
(12 lever box shown)
  • harnesses soldered to PCBs (ones supplied with levers) are tucked underneath the shelf (12 box shown)
  • PCBs mounted under levers (on a wood strip glued to the shelf in this case)
(12 lever box shown)
  • Base of this box has been cut away with a slot for 25way D type connector and a power jack - but the kit's base is plain.
Calculated at checkout

Product Description

The 6 S levers are not included.

This kit is ONLY the box.

Laser cut from 3mm birch ply.  Much stronger than MDF.

The box is for mounting up to 6 S levers (with spacers) and enough internal space to contain the wiring harnesses and mount both types of cobalt control PCBs inside.

Box makes up as a glued frame, with top and bottom panels screwed into place so that all parts can be accessed/removed after assembly. screws for the box are included (but not screws for levers)

The top of the box has a wide enough opening for the lever frame with the metal cosmetic rings already glued into place. (so it can be removed afterwards)

The bottom cover of the box is solid.

The back of the box is open for additional cables and power etc



Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!