Loading... Please wait...

O Scale Stair kit

  • O scale reverse stairway with landings and handrails. Kit makes 3x 2story stairways, (or 2x 3storey, or 1x 6 storey)
  • O scale staircase can be assembled in many different ways.
  • Laser cut parts with assembly jigs to make your stairs dimensionally correct
  • 3 storey frame. (handrails and treads not shown)
  • 6 storey frame (handrails and treads not shown)
  • Kit includes long vertical posts when ordered with the ore bin.
Price:
Winter shutdown: back in Jan 2021
SKU:
KHB010
Scale:
Rating:


Product Description

STAIR AND LANDING KIT    3 REVERSE STAIRWAYS!!

Take the hassle out of making stairs and handrails by using laser cut parts.

Suitable for O Scale : 1/48 and 1/43.

KIT HAS BEEN UPGRADED TO BASSWOOD AND CONTENT CHANGED.

This kit has enough laser-cut panels to make the following stair features variations below:-

   *  3off 2 storey reverse stairway + landings sets with handrails. Height from floor to top step = 82mm (~12ft 8" in 1/48)

OR

   *  2off 3 storey reverse stairway +landings with handrails.

OR

   *   1off 6 storey reverse stairway +landings with handrails.  Can be used with the Ore bin and tipple kit.

Note that the tall vertical posts are only included if ordering with the ore bin. They won't fit in the stair kit box!

 

All have the following dimensional features:-

- step width = 19mm (scale 3ft in 1/48,  2ft 8" in 1/43)

- step height = 4.8mm (scale 9" in 1/48,  8" in 1/43)

- handrail stanchion (post) height from step/landing = 22.5mm (scale 3ft 6" in 1/48, ~3ft 3" in 1/43)

- treads and landings have nail holes.

- Reverse stairs can be made left or right handed. (or one of each)

- Panels are laser-cut in 1/32" and 1/16" basswood sheet.  All parts are cut so that the grain is correct.

The kit includes simple assembly jigs to hold the stringers while glueing the treads.

stair-kit4.jpg

Jigs to hold the handrail posts while the handrails are glued in place

stair-kit5.jpg


Find Similar Products by Category


Write your own product review

Product Reviews

  1. Stairway to heaven (groan!) 5 Star Review

    Posted by on 26th Nov 2013

    Seriously, stairs are complicated beasts in real life or in model form. However, this little kit takes a lot of the hassle out of the assembly by providing two simple but accurate jigs to aid construction. The stringer jig holds them in place whilst the stair treads are glued to them whilst the jig for assembling the hand rails is brilliant. Scratch building handrails is not for the faint hearted in On30 but the jig takes most of the swearing out of what is still a fiddly job due to the size of the parts. The instructions are clear and easy to follow and the components are accurately cut meaning the stairs assemble without fuss. Each stair tread and the landings have laser cut nail holes, something that I have not come across on American kits and its a very nice touch. I 'kit bashed' my stairs to suit my layout but I have lots of bits left over should I need more stairs at a later date. Thoroughly recommended.