Loading... Please wait...

O scale 2 Road Engine Shed

  • O scale 2 road engine shed. Upgraded for 2020 with O scales doors.  (On3 shown)
  • O scale 2 road engine shed. removable roof to show interior.
  • Extension sections grow length.
  • 2 centre extensions grow internal length to 720mm (28 3/8")
  • sliding doors with extra detail. detailed both sides of the doors.
  • 7mm conversion includes a floor to take Peco O scale track, setting the structure at the right height for the doors. the floor also doubles as a jig to assemble the walls.
  • corrugated iron roof option and slated vents. 
(model and picture: Dirk Tegethoff)
  • Corrugated iron roof option. Superb rusty look.
(model+picture: Dirk Tegethoff)
£115. still more work to do for the O scale varaint. contact me if you want the On3 or On30 version

Product Description

O scale 2 Road Engine Shed.

Great for O scale US steam locos too!!

A mixed brick and wooden engine shed that will make a superb centre point for your small locomotive works.

Standard 15" length goes great with Kitwood Hill Models 13.5" turntables.

In extended format, with one centre extension, it grows to an internal length of 21 1/4"

This is a conversion of our On30/On3 shed to take standard gauge. The On30/On3 version is still available!!

2020 7mm/ft conversion:

1. full size O scale doors.  107mm (4.25") above rail height  (actually this is being raised again to 130mm(5")

Full Gauge O Guild clearance - good for all UK locos. and large enough above hi-rail height for USA so should fit all US steam locos

2. smoke hoods raised to match door height

3. Additional Centre section options - extends length by 7 1/8" (180mm) per section

4. Standard gauge floor.  Designed to accommodate peco O scale wooden sleeper track, lifting the structure up to the height of the sleepers so the doors don't have a huge gap under them to clear the track + sleepers.

5. Hinged stall doors can be fitted both ends - tick option if you wish to include extra doors.

With a 15” x 10” footprint this kit produces a large, yet highly versatile structure. The internal length of 360mm fits 50ft locos

New length extension sections fit in the centre, extending the internal length to 540mm (21 1/4") for one or 720mm (28 3/8") with 2 extensions. Each extension section has its own set of roof stacks, smoke collectors, and apex roof vent. The sides are either wood+brick foundation, or all wood. they do not have sliding doors. 

The roof can be built as removable to show off the detailed roof and wall framing and any additional internal detail the modeller may choose to add. The wall surfaces are detailed with interior viewing in mind so it looks great both inside and out. There are different brick/wood options for the side walls - see below for more details

Although the kit has many parts the modular assembly method makes for a straightforward build. Each subassembly is packed separately within the kit to aid construction in stages. A comprehensive 20 page assembly guide with over 165photos takes you through each stage, step by step.

The instructions are not printed! they come in pdf format when the kit is shipped. If you wish to see them first please email me sales@kitwoodhillmodels.com. no obligation - electrons are free :)


Kit features include:-

* laser-cut brick wall sections. Flemish bond brick pattern (inside and out!) with interlocking brick corners - no seams to hide afterwards.

*  2 sets of Sliding doors with exposed sliding roller mechanisms. (can be removed).

* Individual batten and board siding on detailed frames -  look great inside and out.

* end walls can be alternatively arranged so there are 2 windows and one set of hinged doors at either end, or 2 sets of doors both ends.

* Roof apex vents have slatted louvre.

NOTE THAT THIS KIT IS MADE TO ORDER. So it has a typical 3-4 week lead time between ordering and shipping.


1. DIY. no roof covering is supplied - you can use your own favourite method. this is the default selection if you choose nothing.

2. Corrugated iron roof! With this option you'll get strips of our corrugated aluminium, representing 6"rib corrugated iron. More than enough to cover the whole roof with plenty of margin for overlaps and different sizes . adds £18 to cost for the basic structure, and a further £9 for each extension

3. Slate: work in progress.

4. Shingles: these are no longer the printed ones you see in the photos, but rather laser cut thick card that you will need to paint to your chosen colour. Adds £6.00 to cost + £3.00 for each extension

Side Wall Options:

the building is designed around main brick pillars - these never change - each extension section added will add another pillar per side. The wall options are concerning what is in between the pillars! the end walls are always wooden.

1. DEFAULT: mixed wood/brick as photos: wooden walls on low brick foundation on one side, brick with sliding doors on the other.

2. ALL WOOD sides between brick pillars ON BOTH SIDES.  No low brick foundation - the wooden side wall goes to the ground. The sliding doors are fitted to the wooden walls.

3. NO SLIDING DOORS, both sides have wooden walls with brick foundations (2 windows per wall section, replacing the sliding doors.

4. All brick ??? NO! if you want all brick - buy someone elses kit :)

Here are some pics from an On30 kit built up by German modeller Dirk Tegethoff (posted by kind permission). Superb weathering using Fe chloride etching on KHMs aluminium corrugated "iron"!

roof.jpg side.jpg


Below: Another On30 kit (smaller doors) was bashed into this superb industrial shed by Dutch modeller Johan W van Doorn. Johan swapped around the walls and doors, and added extra doors in the rear.

johan-shed1-reduced.jpg johan-shed6-reduced.jpg


Overall Dimensions for the standard engine shed are shown below.




Find Similar Products by Tag

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!